Freight ropeways are usually a large transportation facility that transports materials on the ground and the top of the mountain. Since it often involves high -altitude operations, the security of the ropeway has become a problem that construction workers cannot ignore. In addition to regular maintenance of the ropeway, there are many places to pay attention to when using the ropeway, so that the construction personnel will not be dangerous due to operating errors. So what are the precautions for ropeway?

1. Early warning signals should be issued before driving.

2. The power control device with a power -on -drive power control or maintaining electrical control device is not allowed.

3. When the ropeway is running, it should be equipped with a full -time driver, and there should be a significant warning signs on the upper and downloading points.

4. Passengers are not allowed to take off the chair offside, bypass the drive wheel or roundabout, and get off at the designated place at the designated place.

5. When you get on the car, grab the hanging chair pole with both hands, raise the cable, put the cable on the steel wire rope and stuck tightly, and then cross the hanging seat. Keep the correct sitting position during operation. , Do not doze off, do not grasp the traction cable and support (press) rope wheel with your hands to prevent your hands from hurting your hands. When you get out of the car, you can first hold your feet on the ground. Hold the chair and quickly leave the get off the point to avoid affecting the people from getting off the car (note: hanging chairs cannot leave the car at will, so as not to encounter the people behind).

6. People sitting in the car must not deliberately swing back and forth hanging chairs, and the two people up and down are making trouble, shaking hands, and making trouble. Otherwise, the wire rope will fall off the rope, or the rope stuck to the rope wheel, causing a security accident. In emergency situations, the emergency parking line should be parked immediately, and it should be checked after parking.

7. After replacing the wire rope or loosen the heavy hammer, when restarting the system operation, the steel wire rope should be carried out for 4 hours, so that the new torque generated by the wire rope should be re -balanced, and each trawle and pressure rope are adjusted according to the specified value according to the specified value. The difference between the center of the wheel and the heart of the rope. Otherwise, the rope will be dropped to hurt the safety of people.

8. When the lining of the drive wheel, circuit wheel, and rope wheel is worn to one -third of the thickness of the original, it must be replaced in time. Otherwise, the hug will be damaged and the rope will fall.

9. The items carried by the flight attendant must not exceed 20 kg and the length cannot exceed 1.2 meters. The items they carry cannot be mopped or rampant. It is strictly forbidden to carry public transportation by risk items such as flammable and explosive.

10. In the case of the relative humidity of the environment of more than 85 %, electronic control equipment and electronic components should be specially processed. If the outer box is wet, put the desiccant in the outer box to change the desiccant once a week.