If you want to make a good steel wire rope, you need to go through two steps: steel wire production and steel wire rope production. Before entering the steel wire production, people need to choose the appropriate steel wire raw material according to the usage, and after strict warehousing inspection, they can enter production. After selecting raw materials, a series of production processes such as surface treatment, heat treatment, and pulling. In order to improve the special performance of the wire, it is usually applied to a layer of metal or alloy on the surface of the wire, such as galvanized or zinc and aluminum alloy. Capton and ropeway equipment.

After the production of steel wire is completed, the latter part of the steel wire is produced. The production of steel wire ropes mainly includes three basic processes: drawing, twisted and co -rope. Ritz refers to a method that uses a variety of special means to pull the steel wire into a diameter. Then, the proper steel wires are arranged one by one, and the structural stable and tight stock ropes are produced through machine -line disks, threading tiles, and rear transformers.

In order to meet the various use environments and different uses of the wire rope, in the process of reversing the stock, it is usually applied to a layer of anti -rust lubricant to improve the life of the wire rope. Because of this layer of black oil, the steel wire rope usually feels sticky. See it. It's not clean.

After the rope is completed, people also need to test the steel wire rope to determine its broken point. Only the breakdown of the experimental measurement exceeds the initial design can it be qualified and allowed to be allowed in the market. Therefore, as long as it does not exceed the bearing capacity given by the wire rope, the wire rope is very assured.

After watching the above content, can you take the ropeway equipment with confidence when you play in the scenic area!